MT-MP800 professional mobile phone camera module cleaning machine
is a special machine designed to eliminate dust and impurities on
the surface of camera module products. This machine is suitable for
use for mobile phone camera products, wafer, CMOS, Holder, and dust
removal of other surfaces. The machine's mirror stainless steel integrated enclosed body design can be operated and
suitable for use in dust-free workshops. MT-MP800 machine is
equipped with a PLC automatic control which makes the operation
convenient and user-friendly. MT-MP800 is capable of providing complete cleaning results using ultra-pure water and meets RoHS
standards.
Details
Machine introduction:
MT-MP800 is a professional mobile phone camera module cleaning
machine, used for mobile phone camera products, wafer, CMOS,
Holder, and other surface dust cleaning.
Features of the machine:
1. Special cleaning machine for dust and impurities on the surface
of camera module products;
2. Mirror stainless steel integrated enclosed body, no pollution to
the working environment, suitable for use in dust-free workshops;
3. Replaceable cleaning plate for cleaning more A variety of
products, the cleaning plate is customized according to the
product;
4. PLC automatic control, convenient and quick operation;
5. Transparent explosion-proof front door, safe operation, easy to
observe;
6. The whole system instrument display, monitoring the cleaning
status at any time;
7. Using two-fluid cleaning, High cleaning accuracy, zero damage to
the product, and minimal pure water consumption;
8. Rotary spray bar to avoid secondary pollution of the product;
9. Equipped with static elimination device and cavity wall heating
device to assist cleaning to achieve the best effect;
10. Equipped with a two-stage air filtration system, the compressed
air meets the ISO8573.1 standard;
11. The body is compact and takes up a small area;
12. It is completely cleaned with ultra-pure water and meets RoHS
standards.
Machine specifications:
MT-MP800 specifications
Appearance size of equipment: 880mm(L)×960mm(W)×1880mm(H)
Cleaning plate specifications: Customized (cleaning disc diameter
<ø550mm)
Cleaning method: Two-fluid cleaning
Drying method: High-speed centrifugal drying
Power supply: AC380V 50HZ
Total power: 7KW
Power consumption: When cleaning: 3.5kw/h
Transmission Horsepower: 3HP
Environmental filtering method: 0.3μm; 99.999%
Air filtration method: 1μm×1; 0.01μm×1
Centrifugal speed: 100-1500RPM
Pure water consumption: 0-7L/Min
Gas consumption: 10-30m³/H
Cleaning pressure: Liquid pressure: 3-8Kgf/cm², air pressure:
0.2-0.5Mpa
DI water supply: Flow rate: >7LPM resistivity: >17MΩ
Air supply: Pressure: 0.45-0.7Mpa; Flow: >30m³/H (cleanliness
meets cleaning requirements)
Pure water inlet diameter: ø12mm hose or PT1/2″ internal thread
Air inlet diameter: ø12mm trachea
Drainage outlet diameter: PT 1″ internal thread
Exhaust port diameter: 4″×2 (enhanced ventilation is required, wind
speed is greater than 3m/sec)
Machine net weight: 450KG
